Expert Audi EGR Valve Services Available in Dania Beach

Do you want to know how to avoid issues with the EGR valve in your Audi or how to replace it?  If yes, then you have to drive the car to a mechanic to ascertain whether it is really the problem and then replace it. The EGR valve is one of the emissions control components in your Audi car. Its main concern is to minimize the emission of detrimental nitrogen oxide (NOx). The EGR performs this operation simply by reintroducing some of the exhaust gases into the engine’s intake channel. This, in a way, helps in reducing the combustion temperature and emissions.

In its normal operation, the EGR valve helps increase fuel efficiency and minimize the negative environmental impacts. But if it does not do its job, there will be evident changes in the performance of your Audi. Here is a quick insight into the steps you can take to replace the EGR valve and where you can go to be assured of efficient repairs.

How to Change an Audi EGR Valve

• Locate the EGR Valve: Locate the EGR valve in your automobile’s engine bay. Normally, it is installed close to the intake manifold. If you are unsure where it is, you should check your owner’s manual or a repair manual for your car’s make and model.
• Remove Old EGR Valve: Very cautiously, remove the electric plugs or hoses connected to the EGR valve. Then, use your tools to remove the bolts that keep the valve in position. You should carefully remove the valve and then make sure that the other components surrounding it are not tampered with.
• Clean the Mounting Surface: Wash the surface that used to have the old valve mounted on it with a clean cloth so that there is no dirt or residue on it. Clean every inch of the valves to get rid of grime, carbon deposits, and other deposits to give the new valves a better seal and better functioning.
• Install New EGR Valve: The new EGR valve has to be fitted at the mounting position and then fastened by adjusting the bolts. Some of the electrical connectors and hoses that may be loose should be tightened at this time. Ensure you perform some checks so that almost all parts are tightened and well-positioned to give the best fit.
• Reconnect the Battery and Test the System: Connect the car battery’s terminals back and turn on the engine. Check the engine’s performance to determine whether it is running smoothly. Make sure the check engine light goes off; it indicates that the new EGR valve works properly.

What Can You Do To Prevent EGR Failure

• Use High-Quality Fuel: Buy from well-refilled stations with high-quality fuel in order to avoid damaging your fuel injectors. Superior grade fuel does not deposit carbon onto the EGR valve and other engine parts as does ordinary fuel, resulting in free flow of air passage.
• Perform Regular Cleanings: In case your EGR valve is not totally bad but already displaying signs of blockage, it might be fine to clean it up often. Cleaning helps to dislodge carbon buildup and it also increases the life of the valve.

Where To Go For Audi Professional Assistance in Dania Beach

If you have any doubts about replacing the EGR valve yourself or if the problem continues after changing the EGR valve, it will be wiser to seek a professional’s help. Motronix is an auto repair company established in Dania Beach– Florida, and is best known for its Audi car service and repair. We have professional technicians who will only take a short time to solve the issue of the EGR valve on your Audi.

Our team makes sure to use the best tools and genuine Audi parts to provide your vehicle with the attention that it needs. We have been serving drivers in the South Florida area since the year 1988, and aside from Dania Beach, where we are located, we also help European car owners in nearby cities Hollywood, Miami, and Fort Lauderdale, FL. Come to our shop and book a visit today – our team will help your Audi look and feel its best!